Loading... Please wait...Features:
Specifications:
|
Data Rate |
100 Mbps full duplex |
|
Latency |
< 50 microseconds @ 1000 Mbps** |
|
RF Interface |
72.5/82.5GHz (FDD), digitally modulated (BFSK) with Forward Error Correction (RS 204,188)
1.4GHz bandwidth @ 1000 Mbps Min. Link Distance: 400 m (1,312 ft) |
|
AdaptRate Switching Time |
< 50 milliseconds**
Software configurable: full-time 1000 Mbps, full-time 100 Mbps, or AdaptRate** |
|
Ethernet Interfaces |
1000Base-SX with LC connectors – up to 270 m 62.5/125мm MMF, or 500 m 50/125мm MMF |
|
10/100Base-TX with RJ-45 connector – up to 100 m Cat 5 cable (two Ethernet surge suppressors required) |
|
|
Maximum Ethernet frame length: 1632 bytes |
|
|
Management |
Web-based (HTML) embedded management agent: setup, security, status, statistics, software update SNMP support: MIB-II and BridgeWave enterprise MIB Voltmeter test points: Receive Signal Level and Link Quality |
|
Power |
100-240 VAC input / +24 VDC output indoor power supply — 45 watts max. consumption |
|
Mount |
Fine-adjust pole mount: 3.5-4.5in (8.9-11.4cm) OD -- SCH40 or higher |
|
Size |
Radio with antenna/mount: 62w * 62h * 50d (cm) |
|
Weight |
Radio : 5.2 kg (11.5 lbs), Mount: 3.6 kg (8 lbs), Antenna: 8.5 kg (19 lbs) |
|
Environmental |
Operating temperature: -30 to +50 °C (-22 to 122 °F) Operating altitude: 14,764 ft maximum (4,500 m) |
|
Wind Loading |
120 lbs force @ 100MPH |
|
Regulatory |
Safety: UL Listed; meets FCC 1.1310 general population RF MPE limits RF Certification: US FCC Part 101 |
|
Install Kit |
Voltmeter test cable, power connectors |
** = These features are only available for the FE80UX during the 30-day AR trial period or upon purchase of an FE80UX-to-AR80 upgrade license